10ga reloading manual from poster

Discussion in 'Shooting - Reloading Forum' started by AIRBORNE6869, Nov 1, 2017.

  1. AIRBORNE6869

    AIRBORNE6869 New Member

    Messages:
    13
    Joined:
    Jan 11, 2011
    Location:
    MO
    Way back when; you remember those days. Well back in 2011 when I joined this forum their was and still is a senior, well respected, fellow poster that had thoughts about creating a reloading manual for the 10ga. Now I have been away from the forum for some time but am now back in the fold. My ? is what ever happened to the creation of said manual? It was my belief then as well as now that such a manual would be most interesting to read and could be very helpful for my endeavor to create better and better loads for my Gold 10.

    AIRBORNE
     
  2. 10GAGENUT

    10GAGENUT Elite Refuge Member Flyway Manager

    Messages:
    11,392
    Joined:
    Nov 23, 2003
    Location:
    JeffcoMO
    That would be me, unfortunately I was making one but never got it finished due to new lots of Alliant STEEL giving different results in a lot of loads I had with older lots of STEEL powder. So I decided to go at a different way with reduced loads for newer lots, then health issues stood in my way for a few years. Eventually I'll get it done.
     
  3. theduckguru

    theduckguru Elite Refuge Member

    Messages:
    2,230
    Joined:
    Sep 17, 2003
    Location:
    ohio
    By the time you get around to it STEEL will be back to the specs of Lot 1.
     
  4. AIRBORNE6869

    AIRBORNE6869 New Member

    Messages:
    13
    Joined:
    Jan 11, 2011
    Location:
    MO
    Yes I thought you were the one BUT didn't want to mention any names. Sir, if and when you get to it please put me on the vast list of people to order one.

    AIRBORNE
     
  5. 10GAGENUT

    10GAGENUT Elite Refuge Member Flyway Manager

    Messages:
    11,392
    Joined:
    Nov 23, 2003
    Location:
    JeffcoMO
    That would be nice unfortunately I was ready to put something to print around 4 years ago, then with all the changes we were having with STEEL powder I decided to not to for safety reasons, then I had health issues and that put the kybosh on things. We'll get there
     
  6. AIRBORNE6869

    AIRBORNE6869 New Member

    Messages:
    13
    Joined:
    Jan 11, 2011
    Location:
    MO
    10GAGENUT that appears to be the tail fin of an F4, did you fly them of fix em?

    AIRBORNE
     
  7. Cousteau

    Cousteau New Member

    Messages:
    9
    Joined:
    Apr 3, 2017
    I’m going with F-14.
     
  8. 10GAGENUT

    10GAGENUT Elite Refuge Member Flyway Manager

    Messages:
    11,392
    Joined:
    Nov 23, 2003
    Location:
    JeffcoMO
    F-14, I worked with Grumman quite a bit back in the day.
     
  9. Ringbill

    Ringbill Elite Refuge Member Flyway Manager

    Messages:
    4,137
    Joined:
    Jul 8, 2000
    Location:
    Squaw Lake,MN USA
    Hey there 10 ga. Hope yur feeling good & I'd bet your season is underway?
    Freezing up here the last 10 days with plenty of snow.
    Late season divers & mallards are pushing thru right now ----- good duckin' !

    Ringbill
     
  10. 10GAGENUT

    10GAGENUT Elite Refuge Member Flyway Manager

    Messages:
    11,392
    Joined:
    Nov 23, 2003
    Location:
    JeffcoMO
    Hey Bill from the great White north !! Wow snow already, opening weekend here and we were in the 70's for it, so it goes
     

Share This Page