Any problem, using "Pliobond" adhesive for..

Discussion in 'Bow Hunting Forum' started by jrothWA, Aug 15, 2017.

  1. jrothWA

    jrothWA Senior Refuge Member

    Messages:
    529
    Joined:
    Nov 7, 2006
    Location:
    Washington
    replacing old nocks and resetting arrow inserts?

    Will heat and remove current inserts, clean with fine emery paper the ID of shafts and rinse with denatured alcohol, brass brush to inserts OD and degrease, then reset with current "Pliobond".

    Advise.
     
  2. WoodieSC

    WoodieSC North/South Carolina Flyway Forum Moderator Flyway Manager

    Messages:
    19,571
    Joined:
    Sep 29, 2000
    Location:
    SC
    I'm not familiar, that I recall, with Pliobond. I use hi-temp hot glue and it works fine. And I only use the hi-temp version because I've got a bunch of it, and it's a bit stronger than the regular version, although that should work fine also.
     

Share This Page