Boats & Blinds Forum Sponsors

Trim on 35GTR

Discussion in 'Boats, Blinds, & Gadgets Forum' started by marshmob, Oct 11, 2018.

  1. marshmob

    marshmob Elite Refuge Member

    Messages:
    1,160
    Joined:
    Jul 19, 2007
    Location:
    Kansas
    I am far from a mechanic so maybe one of you guys with more knowledge can help me out. I have a 2010 GTR35 w/125hrs on it. The trim goes up fine but when trimmed down it starts to loose power the farther it goes. I did basic maintenance on it during the summer and only have about 10 hours on it since then. Any information or advice is appreciated.

    Thanks
    Mark
     
  2. HaydenHunter

    HaydenHunter Elite Refuge Member

    Messages:
    10,396
    Joined:
    Dec 4, 2000
    Location:
    Hayden Lake, ID USA
    There is a site about mud motors that you can ask the question at. You will likely find a quicker answer. The first word in the name is mud. The second is motor. The third is talk. Put those all together with a dot.com on the end and you will find it.
     
  3. marshmob

    marshmob Elite Refuge Member

    Messages:
    1,160
    Joined:
    Jul 19, 2007
    Location:
    Kansas
    Not a bad idea. Been a member on there for a bunch of years.
     
  4. marshmob

    marshmob Elite Refuge Member

    Messages:
    1,160
    Joined:
    Jul 19, 2007
    Location:
    Kansas
    Problem solved...simply trim all the way up and hold for 10 seconds. Trim down and do the same. Repeat 3-4 times.
     

Share This Page