10 gauge wads?

[PaulinKansas]

Fixed it for you. Remington SP-10 BBLS pattern a lot different than Browning 10 BBLS.

I've got an Ithaca Mag-10, which is basically the Remington. Would one of those wads be more suitable for the Ithaca barrel?

 

[NW BIRDHUNTER]

SAM 1 is the most versatile

A little more than that.

Remington Hull
Fed. 209A primer
Alliant Steel powder 45 grns.
1.5 OZ. Steel shot
1/4" Felt 20 gauge wad under shot
Reloading Specialties SAM 1 10 Gauge wad
1500 FPS.

This load, with the right choke, will crush Geese and Mallards at ranges that most shouldn't even think about attempting. YMMV

 

[NW BIRDHUNTER]

I've got an Ithaca Mag-10, which is basically the Remington. Would one of those wads be more suitable for the Ithaca barrel

Try the one I just listed with RSI wad, have had great results. Also try this one with the TPS wad if you'd like,

Federal Hull
Win 209 primer
43 grns Alliant Steel
BPI TPS 10 ga. wad
1/4" 20 ga. Felt under shot
1.5 OZ. Steel shot
1530 FPS

Also good.

 

[JRS]

A little more than that.

Remington Hull
Fed. 209A primer
Alliant Steel powder 45 grns.
1.5 OZ. Steel shot
1/4" Felt 20 gauge wad under shot
Reloading Specialties SAM 1 10 Gauge wad
1500 FPS.

This load, with the right choke, will crush Geese and Mallards at ranges that most shouldn't even think about attempting. YMMV

Brah,
Some things don’t need to be advertised!

That’s the “y’all went to the plug” mop up load.

 

[C M Wings]

Try the one I just listed with RSI wad, have had great results. Also try this one with the TPS wad if you'd like,

Federal Hull
Win 209 primer
43 grns Alliant Steel
BPI TPS 10 ga. wad
1/4" 20 ga. Felt under shot
1.5 OZ. Steel shot
1530 FPS

Also good.

This is my exact load out of a Remington 26 inch barrel and a Briley LF choke. Serious medicine.

 

[C M Wings]

Brah,
Some things don’t need to be advertised!

That’s the “y’all went to the plug” mop up load.

Lmao I recall a “few” JRS posts about ….. won’t tell you how far Ts will kill them… and maybe one or two mentions of 90-100 yards. Now we know the recipe lololol.

 

[JRS]

Lmao I recall a “few” JRS posts about ….. won’t tell you how far Ts will kill them… and maybe one or two mentions of 90-100 yards. Now we know the recipe lololol.

No point in tellin’ because then I’d just be a blowhard.

 

[C M Wings]

Ya know we need to do a fuge 10 gauge hunt. No baby bores allowed. Just big booming, steel slinging 10s! At teal….. just because!

 

[Jim Atlas]

Coots too?

 

[JRS]

Ya know we need to do a fuge 10 gauge hunt. No baby bores allowed. Just big booming, steel slinging 10s! At teal….. just because!

Cain’t hit em with my Tee’s